BWKWL - B60013655D 600 INDUSTRIAL ENAMEL

  • MSDS: BWKWL
  • Manufacturer: DAVLIN PAINT CO INC
  • Product Name: B60013655D 600 INDUSTRIAL ENAMEL
  • National Stock Number: 8010-00-598-5945
Product Identification

Product ID:B60013655D 600 INDUSTRIAL ENAMEL
MSDS Date:03/20/1992
FSC:8010
NIIN:00-598-5945
MSDS Number: BWKWL

Responsible Party
DAVLIN PAINT CO INC
700 ALLSTON WAY
BERKELEY, CA 94702
US

Emergency Phone: 510-848-2863

Info Phone: 510-848-2863

Preparer: PATRICIA SHAW

Cage: 3Z268

Contractor
DAVLIN PAINT CO INC
2308 BERKELEY, CA 94702 US

Telephone: 510-848-2863

Cage: 3Z268

Ingredients

AROMATIC PETROLEUM DISTILLATE, HEAVY STRAIGHT RUN NAPHTHA C

CAS: 64741-41-9

Fraction By Weight: 30%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NASAL/RESPIRATORY
IRRITANT/CNS DEPRESSION. EYES: SEVERE IRRITANT. SKIN:
ABSORPTION/PROLONGED/REPEATED CAUSES MODERATE
IRRITATION/DERMATITIS. INGESTION: GI IRRITANT/CNS DEPRESSION.
CHRONIC: DAMAGE TO CNS/RESPIRATORY SYSTEM/LUNGS/EYES/SKIN/GI
TRACT/LIVER/SPLEEN/KIDNEYS. (SEE SUPPLEMENTAL DATA)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA, HEADACHE, TEARING, REDNESS, BLURRED VISION, DEFATTING.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH THOROUGHLY W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEEDED. INGESTION: GIVE WATER/MILK TO DRINK. DON'T INDUCE VOMITING.
UNLESS DI RECTED TO DO SO BY MEDICAL PERSONNEL. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:SCC
Flash Point:104F
Lower Limits:1
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE BUT MAY BE USED AS
FOG FOR COOLING. WEAR SCBA & FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. VAPORS FORM AN EXPLOSIVE MIXTURE W/AIR,
WHICH CAN BE IGNITED BY MANY SOURCES.

Accidental Release

Spill Release Procedures:EVACUATE AREA. REMOVE ALL IGNITION SOURCES.
VENTILATE THE AREA. PROVIDE APPROPRIATE PROTECTIVE EQUIPMENT. DIKE
AREA & COVER W/INERT ABSORBANT. TRANSFER USING NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:STORE <80F IN A CLOSED CONTAINER.
STORE IN ORIGINGAL CONTAINER. AVOID FLAME/HIGH TEMPERATURES. DON'T
STORE NEAR OXIDIZING AGENTS & ACIDS.
Other Precautions:DON'T TAKE INTERNALLY. AVOID PROLONGED/REPEATED
INHALATIONS OF HEATED VAPORS/SPRAY MIST. GROUND ALL CONNECTION
CONTAINERS WHEN POURING/TRANSFERING TO MINIMIZE STATIC ELECTRICITY.
USE NON-SPARKING TOOL S.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED EQUIPMENT WHEN AIRBORNE
LIMITS ARE EXCEEDED. HIGH AIRBORN CONCENTRATIONS MAY REQUIRE THE
USE OF A SUPPLIED-AIR RESPIRATOR/SCBA.
Ventilation:PROVIDE SUFFICIENT TO CONTROL EXPOSURE LEVELS BELOW AIRBORN
EXPOSURE LIMITS. EQUIPMENT MUST BE EXPLOSION PROOF.
Protective Gloves:REQUIRED
Eye Protection:CHEMICAL SAFETY GLASSES/GOGGLES.
Other Protective Equipment:IMPERMEABLE APRONS, CAPS.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE & BEFORE
EATING, TOILETING & SMOKING. REMOVE/LAUNDER CONTAMINATED CLOTHING
BEFORE REUSE.
Supplemental Safety and Health
HEALTH HAZARDS CONT'D: PRODUCT CAN ENTER LUNGS DURING
SWALLOWING/VOMITING & CAUSES LUNG INFLAMMATION.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:315F
Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:PIGMENTED LIQUID/SOLVENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, HIGH TEMPS &
OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO2, CO, LOW MOLEULAR WEIGHT
HYDROCARBONS & ORGANIC ACIDS.

Disposal

Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS & WATERWAYS. DISPOSE
OF PRODUCT IAW/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.